Alarm Messaging

I. Button setup

This is the basic operation to get hand on the application. This apps can be used without additional hardware or IP devices. Buttons can be programmed to do exactly the same action as a Motion dectection of a camera will do. There is no limit to the number of button only place on your screen. Each button is individually setup to react when it is depressed (Normally Open and Red ) or pressed (Normally Closed and green). The video show all the details.

• Button are visible only if "Use Config" is checked in the configuration page.
• Button are activ only if the service is started.
• Button are activated with a finger long pressed touch event.
• ON/OFF button in the middle reinitialize the state of the button.
• Button will restore to their normally state when "ON/OFF" button is toggle, Service is stop or page is left

II. Automatic Voice and Text Call

Voice call and text message can be automatically sent with any kind of event (sound dectection, input state change, output state change, motion video,...). We will show how to set it up with a button. By default a messaging profil of type "CALL" or "SMS" will trigger a manually voice or text call. To automatically call or text a Media with a contact should be associated with the event.

An automatic Call or SMS has a quarantine time. Each profil media has it's own quarantine delay. During this quarantine no more voice call or text message can be sent. The default quarantine delay is globally setup in the Generic menu and the value range from 0 to 120 minutes.

• A contact may have several telephone number
• Automatic voice call only the first contact phone number of any type
• Automatic text message all the contact phone number of type mobile
• ON/OFF button in the middle reinitialize the quarantine delay

III. Schedule an Alarm

Each messaging profile action such as Logging,Vibrate,RingTone, SnapShot, LiveView, Email, Sms or Call can be synchronized with a calendar event. They are found kinds of schedule:

• Always: The messaging action will always occur
• Busy: The messaging action will only occur if the current time is inside the calendar event
• Free: The messaging action will only occur if the current time is outside the calendar event
• Never: The messaging action will never occur

Once the schedule event has been created and associated to an IO, they can be directly modifier in the calendar application of the smartephone.

IV. Integration exemple

Alarm Messaging is an Android Apps which is a part of the "Alarm Central for Smartphone". Every event from the connected hardware can be associated with a specific action. The most common action are to send an SMS, an Email, take a picture... It can integrates with any kind of IP device. What has been done below could be easily done with any kind of IP device.

Video example of intrusion detection One Android Kitkat Emulator is setup as an Alarm Control One Android Kitkat Emulator is setup as an Alarm Messaging One real Android device IceCreamSandwich is setup as an Alarm messaging Digital input is used for the outdoor camera of the main entrance Motion sensor is used for the indoor camera of the living room Sound is coming from the real Panasonic smartphone

Video example of sending SMS and Email One Android Kitkat Emulator is setup as an Alarm Control One Android Kitkat Emulator is setup as an Alarm Messaging One Android Kitkat Emulator is just a phone One real Android device IceCreamSandwich is setup as an Alarm messaging Sound is coming from the real Panasonic smartphone